Saturday , 24 March 2018

Best Scroll Saw | Exepert’s Review Guide

Welcome to Scroll Saw Reviews. I wrote this article to help you find the best scroll saw for beginners. It is not so easy to choose the best one while there are so many Scroll Saws and brands are available. In here, you can find our several Reviews which can help you to make the right decision.

What size saw do you need?

Scroll saws come in two basic sizes, 16 inch and 20 inches.  This measurement refers to the distance between the back of the blade to the back of the saw arm.

A 16 inch is adequate to cut most projects and most sawyers never need a bigger saw.  However, when you move up to a 20 inch saw, the overall quality, the number of features and ultimately the ease and quality of cut improve dramatically.

It would be easy to justify buying the 16-inch saw.  It’s significantly less in cost.  But we have all under bought a tool for this reason.  After a use or two, you then wish you would have spent the extra money and bought the better tool.  That logic applies here.

Best Scroll Saw For Beginners

ImageNameThroat DepthDetails
DEWALT DW78820-Inch
Shop Fox W171316-Inch
WEN 3920 Saw16-Inch
Delta Power Tools20 Inch
Proxxon Scroll Saw15-3/4 inch
Rockwell RK7323 Saw16-Inch
Dremel MS20 Scroll Saw Kit10-Inch
Hegner Scroll Saw18-Inch
Excalibur Scroll Saw16-Inch

Top 9 Scroll Saw Reviews

#1. DEWALT DW788 Scroll Saw 

  • Double parallel-link arm design dramatically reduces vibration and noise for extremely accurate cuts
  • Exclusive tool-free blade clamps allow blade changes in seconds
  • On-off switch, electronic variable speed, flexible dust blower, and blade-tensioning lever all located on front upper arm
  • Arm design pivots from back of the saw to front, shortening the arm movement for smoother, quieter operation
  • Arm lifts so blade can be easily threaded through the material for inside cuts

Pros: very fast shipping, best saw for the money, it makes any project a breeze, solid construction, doesn’t take up much space, easy to assemble, smooth, accurate cuts, blade changing is easy, speed adjustment simple, little to no vibration when cutting, the table large and solid, the dust blower works well to keep the cutting area clear, it will last for years

Cons: It is a bit more expensive but worth it …

Highly Recommended !!!

#2. Shop Fox W1713 Scroll Saw

  • 1/8HP, 1-Amplifier, 110-Volt, 60Hz motor
  • 16-Inch maximum cutting width
  • Includes a gooseneck work light, dust blower, and dust port
  • Plain or pin blades
  • No load speed: 550-1700 SPM

Pros: fast delivery, great value for the price, good little saw, it’s fast to set up, well made for any job requiring precision cuts, this saw is invaluable for sharp cuts, easy to load the blade, the variable speed is great, very little vibration, easy operation, it works as advertised

Cons: it’s heavy, the blade change is a little bit of a problem especially the bottom end …

Highly Recommended!!!

#3. WEN 3920 Variable Scroll Saw 

  • Variable speed goes from 400 to 1600 strokes per minute
  • Cuts wood up to 1.9 inches thick with a 16-inch throat depth
  • Spacious 16 by 10-inch table bevels up to 45 degrees to the left for angled cuts
  • Cast iron body provides a stable base with limited vibration
  • Includes air pump, flex light, dust port, foot lock clamp, and two blades

Pros: outstanding customer service, good saw for the money, easy to setup and use, the plain end blades are easy to change out and hold in place very well, variable speed, not too much vibration, takes both pin and pinless blades, LED light works very well

Cons: blades aren’t very easy to switch out, the blower is not very powerful …

Highly Recommended!!!

#4. Delta Power Tools 40-694 Variable Speed Scroll Saw, 20”

  • Electronic variable speed can be adjusted from 400-1,750 SPM for a wide array of cutting applications
  • Dual parallel link arm design reduces vibration reducing over and under cutting improving accuracy and quality
  • Upper arm lifts and locks in the raised position during blade changes or while adjusting blade position for fret work
  • Tool-free blade clamp allows for quick, easy blade changes in seconds

Pros: packaged well, nice and quiet, it’s no vibration in low, mid speed with very little, smooth running on high speed, it cuts great, heavy enough to cut up to 2-inch material, it does the job extremely well, you’ll love the locking arm, the top arm swing up and locks to give you better access to your work, the blade storage on the top, blade changes are fast, easy easy to assemble 

Cons: poor manual, some vibration at the top speed …

Highly Recommended !!!

#5. Proxxon 37090 DSH/E Scroll Saw, 15-3/4”

  • Equipped with vacuum adapter for clean and dust free work space
  • Quick tension release lever for frequent inside cuts
  • Comes with 5 coarse and 5 fine saw blades

Pros: great customer service, excellent price, fast shipping, its light and small, nice mid-range scroll saw, does not take up too much room, it’s worth every dollar, changing the blade is easy with the quick release utility, this is quiet saw and no vibration when working at the slower speeds, handled without adversity, you can make very quick precise cuts

Cons: full speed has a noisy knock and lots of vibration …

Highly Recommended!!!

#6. Rockwell RK7323 

  • Traditional guard and riving knife system allows unlimited capacity for cross and rip cuts
  • Lightweight and compact. Easy to carry anywhere
  • Sets up in seconds to cut wood, tile, plastic, metal, and aluminum
  • Uses standard t-shank jigsaw blades
  • Adjustable Miter Gauge for 0 Degree to 60 Degree angled cuts, right or left

Pros: This is a really handy little saw, good saw for the home craftsman, needs a very small workspace, it has an easy change blade system, the cutting guard does a good job at surrounding the cutting area, the motor seems beefy enough for cutting thicker and harder materials, cuts wood effortlessly, makes small cuts very easy, cuts cleanly and quickly, the dust collector is a must for working in your house 

Cons: it is not perfect but close enough, it can’t vary the speed of the blade …

Highly Recommended!!!

#7. Dremel MS20-01 Moto-Saw Variable Speed Compact Scroll Saw Kit

  • Dust port adapter keeps line-of-sight clear and work space clean
  • Auto tensioning quick-change mechanism for easy accessory change and optimal blade tensioning
  • Detachable copying function for handheld use to take the tool to the work piece
  • Variable-speed control for optimal cutting in a variety of materials
  • Fast-clamp base attaches to various tables, benches, and surfaces
  • Blue edge guide locking levers illustrated on packaging are not included in the kit and do not affect performance of the tool

Pros: fast shipping, the price is reasonable for a multipurpose tool, much more versatile, sweet little saw set up, it great for hobbyist, works nice on small jobs, works well for wood modeling jobs, very light and pretty much made completely out of plastic, portable and table use are very accurate

Cons: this is loud, limited to 1/4″ thick softwood …

Highly Recommended!!!

#8.Hegner Variable Speed Scroll Saw, 18″

  • Double Quicklock Tensioning System
  • Electronic Variable Speed Induction Motor
  • Highly Precise and Reliable
  • 7 Year Manufacturer’s Warranty against defects
  • Recommended Stand sold separately on this site

Pros: its excellent choice for heavy duty, user-friendly, smooth, quiet, stable, precise, compact, no bounce, no lifting of the work, variable speed, 18″ throat allows you to cut larger pieces, blade changing is fast and easy, sawdust is blown away keep the cutting line clear and visible

Cons: it is expensive

Highly Recommended!!!

#9. GENERAL INTL Scroll Saw

Excalibur scroll saw

  • Slightly smaller version of the 21” Excalibur scroll saw
  • The unique “Tilting Head” design provides a stable platform when cutting straight or on an angle
  • Changing blades is a snap – No tools required
  • Excalibur TMs upper arm lift is ideal for threading the blade through fret work
  • Large 12” x 18 1/2″ table surface

Pros: fast shipment, it well worth the extra money, well packed, good deal with the stand and the foot switch, came with a very good manual and several blades, fine for cutting thin wood, very intimate cuts and overall accuracy, the built in dust collection is an excellent plus

Cons: it will cut thin wood well but not very thick …

Highly Recommended!!!